|Name:||Electric Furnaces SiC Heater||Feature:||Anti Oxidization|
|Material:||Silicon Carbide (SiC)||Diameter:||8-54mm|
|Length:||As Requested||Working Temperature:||1400ºC|
|Application:||Powder Metallurgy And Machinery||After-sales Service:||Online Support|
600C SiC Heating Elements,
600C Electric Furnaces Heating Elements,
1600C Silicon Carbide Heater
Electric Furnaces SiC Heater is a kind of non-mental high temperature electric heating element.It is made of selected high-purity green silicon carbide as raw material which is made into blank and silicon crystal under high temperature of 2400ºC. It can usually make use for furnance which temperature from 600C-1600ºC. It is widely used in various electric heating element of glass,chemical, electronic material and so on.
Electric Furnaces SiC Heater Specification
|Name:||Electric Furnaces SiC Heater|
|Shape:||ED, SC, SCR, Dumbbell, U, W and other special shape|
|Usage temperature:||Up to 1400C|
|Production process:||Made into blank, silicided under high temperature and re-crystallized.|
|Available diameter:||12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 25mm, 30mm, 31.8mm, 35mm, 38.1mm, 40mm, 44.5mm, 50mm, 54mm|
|Length of hot
|Length of cold
|We can produce according to you need specifications.|
|Attention||1) In order to keep furnace temperature and the charges uniform of each element, before installation resistance distribution must be carried.
2) As the element is very brittle, be careful while install and maintain to avoid any damage.
3) When start to operate the furnace, raise voltage slowly and gradually, never give full load at one time.
|Application||Used in various high temperature electric furnaces and other electric heating devices, such as in the industries of magnet, ceramics, metallurgy, glass, and machinery.|
Widely application :
It is extensively used in the fields of metallurgy ,ceramics, glass ,machinery,analysis test semiconductor science and research
When you place an order of theED type heater silicon carbide SiC heating elements , please give following information:
OD: Outer Diameter;
HZ: Length Of Hot Zone;
CZ: Length Of Cold Zone;
OL: Overall Length,
Contact Person: chen