Products

Adheres to the customer demand orientation

Molybdenum crucible

Molybdenum is a silver white metal with an atomic radius of 0.14nm, an atomic volume of 235.5px/mol, a coordination number of 8, and an Az type body centered cubic crystal system with a spatial group of O. No isomeric transformation has been found to date. The lattice parameters of molybdenum at room temperature range from 0.31467 to 0.31475nm and vary with impurity content. Molybdenum has a high melting point and ranks sixth among elemental substances in nature, known as a refractory metal. The density of molybdenum is 10.23g/cm ³, About half of tungsten (tungsten density 19.36g/cm) ³)。 The coefficient of thermal expansion of molybdenum is very low; Molybdenum has a higher thermal conductivity. Low molybdenum resistivity: 5.17 at 0 ℃ × 10 Ω· cm; 24.6 at 800 ℃ × 10
Learn more

Tungsten molybdenum plug

Product diameter specifications: Φ 20-300mm, and can be specially processed and made according to your drawing requirements. Mainly used for piercing seamless steel pipes such as stainless steel, brazing steel, bearing steel, and high-temperature alloy steel, and for hot rolling piercing of seamless pipes of different materials in high-temperature and harsh environments.
Learn more

Molybdenum electrodes

Molybdenum electrodes have high high-temperature strength, good high-temperature oxidation resistance, and long service life. Based on these advantages, they are usually used in daily glass, optical glass, insulation materials, glass fibers, rare earth industry, and other fields.
Learn more

Tungsten molybdenum rod

Used as a high-temperature heating element and high-temperature structural component
Learn more

Alumina Ceramic chip

Ceramic sheets and boards are stock shapes available as solid plates, slabs, and substrates. The board or plate may consist of a ceramic fiberboard product, a dense sintered ceramic plate, or a precast cement bonded slab.
Learn more

Custom Zirconia Ceramic Tube

Ceramic tubes are ceramics used in certain devices, equipment, or structures that can withstand static or dynamic mechanical loads under high temperature conditions. It has a high melting point, high high-temperature strength, and small high-temperature creep performance, as well as good heat shock resistance, corrosion resistance, oxidation resistance, and structural stability. High temperature structural ceramics include two categories: high-temperature oxides and high-temperature non oxides (also known as refractory compounds).
Learn more

Customized Industrial Aluminum Ceramic Tube

Alumina ceramics have good conductivity, mechanical strength, and high temperature resistance. It should be noted that ultrasonic cleaning is required. Alumina ceramics are a widely used ceramic, and due to their superior performance, their applications in modern society have become increasingly widespread, meeting the needs of daily use and special performance.
Learn more

High Pressure Atomising Zirconia Nozzles

Zirconia ceramic nozzle have high wear resistance, which is twice as good as metal materials. Combined with polishing technology, their surface roughness reaches 0.03 μ m. Effectively reducing the resistance of liquid flowing through the in ner wall of the nozzle and improving injection efficiency.
Learn more

High Temperature White 99.7% Alumina Ceramic Tube

High purity aluminum oxide powder is a white micro powder with uniform particle size, easy to disperse, stable chemical properties, moderate high-temperature shrinkage performance, and good sintering performance; High conversion rate and low sodium content. This product is the basic raw material for producing heat-resistant, wear-resistant, and corroData Sheet
Learn more

Anti Abrasion Inconel 718 Rod 3.0mm Nickel Chromium Alloys

Anti Abrasion Inconel 718 Rod 3.0mm Nickel Chromium Alloys
Learn more

Pure Nickel Nichrome Alloy Cr20Ni80 Resistant Heating Wire

This product is characterized by high temperature resistance, fast heating, long service life, stable resistance, small power deviation, uniform pitch after stretching, bright and clean surface, widely used in small electric furnaces, muffle furnaces, heating and air conditioning equipment, all kinds of ovens, electric heating pipes and household appliances. According to the needs of users, we can design and produce a variety of non-standard industrial and civil stoves.
Learn more

Cold Rolled Inconel 625 Coil AISI ASTM Nickel Chromium Alloys

Alloy 625 is face-centered cubic lattice structure. Dissolve out the carbon granule and instability quaternary phase, then change it to stability Ni3 (Nb,Ti) trimetric lattice around 650°C after a long time heat preservation. nickel-chromium content will strength the mechanical performance in the state solution while suppress the plasticity.
Learn more