|
Product Details:
|
| Name: | Cr20Ni80 Heating Resistance Wire | Type: | Nickel Wire |
|---|---|---|---|
| Ni (Min): | 58 | Color: | Nickel Nature |
| Surface: | Bright And Smooth | Surface Treatment: | Polished |
| Process Method: | Cold Rolled; Hot Forged | Standard: | ASME, GB, DIN, JIS, Etc. |
| High Light: | Ni80 Heating Resistance Wire,Cr20Ni80 Heating Resistance Wire,Ni80 Nickel Chromium Alloys Wire |
||
Cr20Ni80 / X20H80 / Nikrothal 80 / Nichrome Heating Resistance Wire Ni80
Introduction
heat resistance wire is a type of high resistance electrical wire. The wire resists the flow of electricity, and converts the electrical energy into heat.
Nichrome, a non-magnetic alloy of nickel and chromium, is commonly used to make resistance wire because it has a high resistivity and resistance to oxidation at high temperatures. When used as a heating element, resistance wire is usually wound into coils.
The high nickel content, in combination with the high chromium content let the scaling temperature can reach to 1250ºC
Chrome Nickel wire was shaped by means of high speed automatic cooling machine of which the power capacity is controlled by computer, they are available as wire and ribbon(strip).
Feature
1) The highest working temperature up to 1200 degree.
2) higher strength than iron chromium aluminum under high temperature
3) not easy to deform under high temperature
4) good plasticity
5) easy to repair,
6) high emissivity,
7) Non-magnetic
8) strong corrosion resistance,
9) long service life
|
Item Brand |
Chemical Composition (%) | |||||||||
| Inconel 625 | C | Mn | Si | S | Cr | Ni | Fe | |||
| ≤0.1 | ≤0.5 | ≤0.5 | ≤0.015 | 20.0~23.0 | ≥58.0 | ≤5.0 | ||||
| Ti | Al | P | Mo | Co | Cb+Ta | |||||
| ≤0.4 | ≤0.4 | ≤0.015 | 8.0~10.0 | ≤1.0 | 3.15~4.15 | |||||
| Standard | ||||||||||
| Sheet/Plate | Round Bar/Wire | Pipe | Tube | |||||||
|
ASME SB-443 AMS 5599 AMS5869 |
ASME SB-446 AMS 5666 AMS 5837 |
ASME SB-444 ASME SB-751 ASME SB-829 ASME SB-775 |
ASME SB-704 ASME SB-705 ASME SB-775 ASME SB-751 |
|||||||
| Alloy status | Tensile strength Rm N/mm² |
Yield strength RP0.2 N/mm² |
Elongation A5 % |
Brinell hardness HB |
| Solution treatment | 760 | 345 | 30 | ≤220 |
6. Acetic acid and anhydride reaction generator.
7. Sulfur acid cooling.
Contact Person: chen
Tel: +8615903677007
