|
Product Details:
|
| Name: | Inconel 718 Bar | Material: | Inconel 718 Nickel Chromium Alloys |
|---|---|---|---|
| Chemical Composition: | Ni, Cr, Fe | Shape: | Round |
| Size: | 3-60mm 1000*2000mm | Surface: | As Per Customers' Requirement |
| Application: | Petrochemical | Technique: | Cold Drawn Hot Rolled |
| High Light: | ASME Nickel Chromium Alloys,ASME Inconel 718 Bar,Petrochemical Inconel 718 Bar |
||
Petrochemical Inconel 718 Bar ASME Nickel Chromium Alloys
Inconel 718 Bar Introduction
Inconel 718 Inconel718 alloy is a precipitation hardening nickel-chromium iron alloy containing niobium and molybdenum. It has high strength,good toughness and corrosion resistance in high and low temperature environment under 650℃. The state can be solid solution treatment or precipitation hardening state.
Inconel 718 Bar Application:
Inconel 718 Bar Parameters
| Item | Size |
| Plate/Sheet | 0.5~60.0mm (THK)*2000mm(WIDTH)*6000mm(LENGTH) |
| Bar (Round) | Φ5.5~250mm |
| Bar (Square) | 40~240mm*40~240mm |
| Strip | 0.05~3.0mm (THK)*≤420mm(WIDTH) |
| Seamless Pipe | 0.2mm~508mm (OD)*0.5mm~18mm(WT) |
| Welded Tube | 0.5mm~120mm (OD)*0.05mm~10mm(WT) |
| Wire | Φ0.1mm~18mm |
|
ement
|
Content
|
|
Ni+Co
|
50 - 55 %
|
|
Cr
|
17 - 21 %
|
|
Fe
|
BAL
|
|
Nb+Ta
|
4.75 - 5.5 %
|
|
Mo
|
2.8 - 3.3 %
|
|
Ti
|
0.65 - 1.15 %
|
|
Al
|
0.2 - 0.8 %
|
|
operty
|
Metric
|
Imperial
|
|
Density
|
8.19 g/cm3
|
0.296 lb/in3
|
|
Melting point
|
1336 °C
|
2437 °F
|
|
Co-Efficient of Expansion
|
13.0 µm/m.°C
(20-100 °C) |
7.2x10-6 in/in.°F
(70-212 °F) |
|
Modulus of rigidity
|
77.2 kN/mm2
|
11197 ksi
|
|
Modulus of elasticity
|
204.9 kN/mm2
|
29719 ksi
|
Contact Person: chen
Tel: +8615903677007
