|
Product Details:
|
| Type: | 1450 ℃ Sic Heating Elements | Applicable Industries: | High Temperature Furnaces |
|---|---|---|---|
| Usage: | Electric Oven | Certification: | ISO9001:2008 |
| Working Temperature Range: | 700 - 1450 ℃ | Volume Density: | 5.5-5.6g/cm3 |
| Porosity Rate: | 7.4% | Length: | 50-4300mm |
| High Light: | 20mm Oven Heating Elements,1600C Oven Heating Elements,1600C Sic Heating Elements |
||
Silicon Carbide W Type 1600℃ Heating Elements
Sic Heating Elements General Description
Silicon carbide heating element is a kind of non-metal high temperature electric heating element. It is made of selected high quality green silicon carbide as main material, which is made into blank, siliconization under high temperature and recrystallized. It is the most popular type of economical heating element capable of operating under hot and rigorous environments.
Sic electric rod is a kind of non-mental high temperature electric heating element.
Sic Heating Elements Features as following:
1. use for furnance which temperature from 600C-1600ºC.
2. high strength and excellent shock resistance
3. heat source is free of noise and air pollution
4. anti-oxidization, anti- corrosion
5. easy to installation and maintenance
Sic Heating Elements Advantages
W type SiC heaters can be installed and replaced while the tin bath is operation. The heaters can be installed through the side-seal, or through the side of the bath roof, and are commonly used to extend campaign lives, where conventional elements in the side zones have been broken, and insufficient power is available.
Physical properties
|
Sic heating element Physical Parameters |
|
|
Density |
2.6-2.8g/cm³ |
|
Hardness |
＞9MOH'S |
|
Porosity Rate |
＜30% |
|
Bend Strength |
＞300kg |
|
Tensile Strength |
＞150kg/cm³ |
|
Radicancy |
0.85 |
Chemical Properties
1. Antioxidant property of elements
2. Alkali&alkaline metal oxide will come out alkali-chemical corrosion
3. Melting metal can corrade the element and affect the life.
Remarks: Please provide the following when an inquiry or order is send.
Type: W 3-Phase(3-Phase)
Outer diameter (OD): mm
Hot zone length (HZ): mm
Cold end length (CZ): mm
Shank spacing (A): mm
Examples: W type, OD=20mm, HZ=250mm, CZ=350mm, OL=625mm, A=52mm, Resistance 0.9Ω
Specify as: W, 20/250/350/52/0.90Ω
Contact Person: chen
Tel: +8615903677007
