|
Product Details:
|
| Type: | Molybdenum Disilicide Silicon Molybdenum Rods | Applicable Industries: | Chemical, Mechanical, Electronic, Automotive And Other Industries |
|---|---|---|---|
| Power Source: | Electric | Temperature Range: | 1700c 1800c 1900c |
| Material: | Mosi2 Molybdenum Disilicide | Shape: | U, W, I, UL, WL, Spiral |
| Molybdenum Purity: | 99.9% High Purity | Diameter: | 3/6,4/9,6/12,7/14,9/18,12/24mm |
| High Light: | 1900c Molybdenum Disilicide Heating Element,1800c Molybdenum Disilicide Heating Element,1700c Molybdenum Disilicide Heating Element |
||
U Type Molybdenum Disilicide Heating Element 1900℃
Introduction
Molybdenum disilicide(MoSi2) heating elements for element temperatures up to 1800C(3270F), Our MoSi2 heating elements are available as straight or bent elements in a wide range of shapes and sizes, All characterized by long life and consistant perfomance.
Specification:
Grade: 1700/1800
Dia: 3/6, 4/9, 6/12, 9/18, 12/24 etc.
Type: I, U, W, Pole, and U-right angle shapes, etc
And we can produce according to your requests.
We provide special designed MoSi2 elements according to customer needs, enabling an optimized element design for each particular application
Element Replacement
If there is a damaged part found in the process of operation, the first thing you should do is determine its location and get all the combination elements ready. After that, you should separate the wire the damaged element clipped to from the screw which is connected to the generatrix. Then remove the remained refractory wool and pull out the refractory stoppers. Insert the new combination elements into the furnace from its roof. Connect all the wires and get the refractory wool filled, and finally raise the temperature.
Physics characters
|
Bulk density |
Bending strength |
Hardness |
Apparent porosity |
Drawing water rate |
Thermal elongation |
|
5.6~5.8g/cm3 |
20MPa(20℃) |
(hv)570kg/mm² |
0.5~2.0% |
0.5% |
4% |
Recommend surface load:
|
Furnace Temp(°c) |
1400 |
1500 |
1600 |
1650 |
1700 |
|
Surface load of hot zone(W/cm²) |
<18 |
<15 |
<12 |
<10 |
<8 |
Application:
|
Item |
name |
distinction criterion |
specification |
|
Heating elements |
1700 type |
Element operating temperature 1700℃ is acceptable |
Le Φ |
|
1800 type |
Element operating temperature 1800℃ is acceptable |
||
|
1800J type |
Element operating temperature≥1800℃ |
Le Φ |
|
|
1800T type |
Element operating temperature≤1800℃ |
Le Φ |
|
Small furnace (power100KW) |
Large furnace(Power 100-500KW) |
||
|
Furnace temperature |
Voltage |
furnace temperature℃ |
Voltage |
|
20-150 |
1/3 Operating voltage |
1/3 Operating voltage200-300 |
1/3 Operating voltage |
|
150-500 |
2/3 Operating voltage |
300-700 |
2/3 Operating voltage |
|
500-operating temperature |
The Whole-Operating Voltage |
700-Operating temperature |
The Whole-Operating Voltage |
Contact Person: chen
Tel: +8615903677007
