|
Product Details:
|
| Type: | 1600c Sic Heating Elements | Feature: | High Temperature Resistance |
|---|---|---|---|
| Power Source: | Electric | Dimension(l*w*h): | Customized |
| After-sales Service Provided: | Overseas Third-party Support Available | Material: | Silicone |
| Application: | Widely Used In All Kinds Of Industry Heating Process | Heating Wire: | Nickel Chrome Wire |
| High Light: | 1600c Sic Heating Elements,1600c Custom Heating Elements,1600c Electric Heating Elements |
||
High Temperature Resistance 1600℃ SiC Heating Elements
1600c Sic Heating Elements
Silicon carbide rod heating element is a kind of non-metal rod or tube shape high temperature electric heating element. It is made of selected super purity green hexagonal silicon carbide as main material, which is made into blank and silicon crystal under high temperature of 2400ºC. In oxidizing atmosphere, its service temperature can reach 1450°C and continuous use life can reach 2000 hours.
Type: we have rod, u, w, h, gun, single spiral, double spiral, dumbbell, door like type
1600c Sic Heating Elements Features
1600c Sic Heating Elements Application
Thermoforming & Vacuum Forming Machines
PVC Pipe Belling / Socketing Machines
Hot Stamping Machines
Heat Therapy Equipment
Parameters
Type: U-Shaped;
Outer diameter (OD): mm, Overall length (OL): mm, Hot zone length (HZ): mm, Cold end length (CZ): mm, Shank spacing (A): mm
Example: U Type, OD=20mm, HZ=300mm, CZ=400mm, OL=700mm, A=60mm, Resistance2.24Ω
Specify as: U Shaped,20/300/700/60/2.24Ω
|
Outer Diameter (OD, mm) |
Hot zone (HZ, mm) |
Cold zone (CZ, mm) |
Overall length (OL, mm) |
Range of resistance (ohms) |
|
8 |
100-300 |
60-200 |
240-700 |
2.1-8.6 |
|
12 |
100-400 |
100-350 |
300-1100 |
0.8-5.8 |
|
14 |
100-500 |
150-350 |
400-1200 |
0.7-5.6 |
|
16 |
200-600 |
200-350 |
600-1300 |
0.7-4.4 |
|
18 |
200-800 |
200-400 |
600-1600 |
0.7-5.8 |
|
20 |
200-800 |
250-600 |
700-2000 |
0.6-6.0 |
|
25 |
200-1200 |
250-700 |
700-2600 |
0.4-5.0 |
|
30 |
300-2000 |
250-800 |
800-3600 |
0.4-4.0 |
|
35 |
400-2000 |
250-800 |
900-3600 |
0.5-3.6 |
|
40 |
500-2700 |
250-800 |
1000-4300 |
0.5-3.4 |
|
45 |
500-3000 |
250-750 |
1000-4500 |
0.3-3.0 |
|
50 |
600-2500 |
300-750 |
1200-4000 |
0.3-2.5 |
|
54 |
600-2500 |
300-750 |
1200-4000 |
0.3-3.0 |
Notice
1. Before installation of SiC heater, we should check the resistance marked on the
cold ends. resistance difference of each group is ± 0.1
2. When SiC heaters are through the holes on furnace wall on either side (or up and down),
we should rotate them 360 degrees. Do not mandatory installation with the beat.
3. Silicon Carbide heating elements must be equipped with regulating transformers
or thyristor voltage regulator and voltage, ampere meter, and automatic temperature
control instrument. Due to oxidation, resistance increases gradually, in order to maintain
normal temperature we should increase voltages. When voltages reach the maximum
of transformer,we can change the connection mode of SiC heaters and then continue to use.
Contact Person: chen
Tel: +8615903677007
