+
  • 30.jpg

Cold Rolled Inconel 625 Coil AISI ASTM Nickel Chromium Alloys

Alloy 625 is face-centered cubic lattice structure. Dissolve out the carbon granule and instability quaternary phase, then change it to stability Ni3 (Nb,Ti) trimetric lattice around 650°C after a long time heat preservation. nickel-chromium content will strength the mechanical performance in the state solution while suppress the plasticity.

Keywords：

Cold Rolled Inconel 625 Coil AISI ASTM Nickel Chromium Alloys

Categorie:

Nickel Chromium Alloys

Send Inquiry
Free Contact
E-mail
  • Description

  • Alloy 625 is face-centered cubic lattice structure. Dissolve out the carbon granule and instability quaternary phase, then change it to stability Ni3 (Nb,Ti) trimetric lattice around 650°C after a long time heat preservation. nickel-chromium content will strength the mechanical performance in the state solution while suppress the plasticity.

    625 Inconel 625 High Temperature Alloy, 625 Inconel 625 High Temperature Alloy, 625

    Product specification range: diameter 6-500mm, length 0.5-30m; Product specification range: thickness 0.5-80mm, length 1-6m, width 0.5-3m Product specification range: outer diameter 6-530mm, wall thickness 0.5-50mm, length 1-12m.

    Essential details：

    Alloy 625 is an austenitic nickelchromium-molybdenum-niobium alloy possessing a rare combination of outstanding corrosion resistance coupled with high strength from cryogenic temperatures to 1800°F (982°C).

    The strength of Alloy 625 is derived from the solid-solution hardening of the nickel-chromium matrix by the presence of molybdenum and niobium. Therefore, precipitation-hardening treatments are not required.

    The chemical composition of Alloy 625 is also responsible for its outstanding corrosion resistance in a variety of severe operating environments along with resistance to oxidation and carburization in high temperature service. The alloy is resistant to pitting, crevice corrosion, impingement corrosion, intergranular attack and is almost immune to chloride stress corrosion cracking. Alloy 625 can be easily welded and processed by standard shop fabrication practices.

    Inconel 625 Strip Specification

    Item

    Size

    Plate/Sheet

    0.5~60.0mm (THK)*2000mm(WIDTH)*6000mm(LENGTH)

    Bar (Round)

    Φ5.5~250mm

    Bar (Square)

    40~240mm*40~240mm

    Strip

    0.05~3.0mm (THK)*≤420mm(WIDTH)

    Seamless Pipe

    0.2mm~508mm (OD)*0.5mm~18mm(WT)

    Welded Tube

    0.5mm~120mm (OD)*0.05mm~10mm(WT)

    Wire

    Φ0.1mm~18mm

    Parameters

    Item

    Chemical Composition (%)

    Inconel 600

    C

    Mn

    Si

    S

    Cr

    Ni

    Fe

    Cu

    ≤0.15

    ≤1.0

    ≤0.5

    ≤0.015

    14.0~17.0

    ≥72.0

    6.0~10.0

    ≤0.5

    Standard

    Sheet/Plate

    Round bar/Wire

    Pipe

    Tube

    ASME SB-168
    AMS 5540

    ASME SB-166
    AMS 5665

    ASME SB-163
    ASME SB-167
    ASME SB-751
    ASME SB-775
    AMS 5580

    ASME SB-516
    ASME SB-517
    ASME SB-751
    ASME SB-775

     

Send Inquiry

NOTE: Please leave your email, our professional person will contact you asap!

SUBMIT